Zemismart AM24-RF Rechargeable Venetian Blind Motor with RF Remote
Motor Only
£73.93 GBP
Skip to product information
Zemismart AM24-RF Rechargeable Venetian Blind Motor with RF Remote
£73.93 GBP
AM24-RF 7.1
The Zemismart AM24-RF is a slim, rechargeable motor that fits inside the head rail of a venetian blind. It raises, lowers and tilts the slats at the press of a button, runs from a Li-ion battery pack instead of mains power, and is controlled by the RF remote in the box. There are no cables to the wall and no electrician needed.
Want app and voice control? See the ZM24TQ WiFi blind motor. For a chain-operated blind, see the MTP1. Fitting roller blinds? See the ZM25WB and the other ZM25 tube motors. Want the quietest option? See the M24 12V motor.
Battery powered, so no wiring at the window
The motor runs from a 7.4V Li-ion battery pack that sits in the head rail beside it. A full charge lasts up to about three months in typical use (two or three runs a day). When it runs low, recharge the pack: about 6 hours on a standard charger or about 3 hours on a fast charger.
Simple RF remote control
The included remote has up, stop and down buttons. One motor can learn up to 20 remotes, and one remote can run several blinds together, so a whole bay window opens and closes in step.
Made for venetian, pleated and honeycomb blinds
The AM24-RF is built for aluminium venetian blinds, and also suits pleated and honeycomb (cellular) blinds that use a lift-cord head rail. On venetian blinds, it moves in small steps by default, so you can tilt the slats precisely to control light and privacy. Switch to continuous movement when you want the blind fully up or down.
Compact enough to hide in the head rail
The motor measures 250 × 25mm and the battery pack 147 × 25mm, so both fit out of sight inside a standard head rail. The double drive shaft turns the lift cords at both ends of the blind, so it lifts evenly.
Quiet and smooth
- Soft start and soft stop for smooth movement.
- Overload and over-current protection.
- A geared reducer keeps it quiet and smooth.
- Constant speed means several blinds in one window stay level.
- Set top, bottom and one middle position, and reverse the direction from the remote.
Specifications
| Specification | Detail |
|---|---|
| Model | AM24-RF |
| Input voltage | 7.4V DC (Li-ion battery pack) |
| Rated torque | 0.3Nm or 0.6Nm, depending on version |
| Rated speed | 34rpm |
| Control | RF remote, 433.92MHz |
| Remotes per motor | Up to 20 |
| Limit positions | Top, bottom and one middle position |
| Battery life | Up to about 3 months per charge (typical use) |
| Charging time | About 6 hours (standard), about 3 hours (fast charger) |
| Motor size | 250 × 25mm |
| Battery pack size | 147 × 25mm |
| Remote size | 127 × 42mm |
| Suitable blinds | Aluminium venetian, pleated and honeycomb blinds with a lift-cord head rail |
What's in the box
- Zemismart AM24-RF venetian blind motor
- Li-ion battery pack
- RF remote
Setting up and fine-tuning
Pair the remote, set the top and bottom limits and choose the running direction in a few button presses. The full steps are in the manual below.
User manual
Download the AM24-RF user manual (PDF)
Frequently asked questions
Will the AM24-RF fit my existing venetian blind?
It fits inside the head rail of many aluminium venetian blinds, but the rail must be wide enough for a 25mm motor and the lift-cord shafts must match. Check your head rail before ordering, or ask a blind fitter.
Do I need an electrician?
No. The motor runs from the rechargeable battery pack, so there's no mains wiring.
How long does the battery last?
Up to about three months per charge with two or three runs a day. Heavier use means more frequent charging.
Can I still tilt the slats?
Yes. On venetian blinds the motor moves in small steps by default, so a short press tilts the slats.
Can one remote control several blinds?
Yes. Pair the same remote with each motor to move them together.
Can I set a middle position?
Yes. As well as the top and bottom limits, you can save one middle position.