Zemismart ספוט שקוע חכם Zigbee, ‏12W נגד סנוור, מתכוונן, לבן מתכוונן

The Zemismart ZMZ-SL is a 12W recessed smart downlight that looks like an architectural fitting and works like a smart bulb. Tune the white light from warm 2700K to cool 6000K, dim it to suit the moment, and control it from the Tuya app, Alexa or Google, or from Apple Home through a Zemismart M1 or M6 hub. The deep-set LED keeps glare to a minimum, and the head tilts up to 30° to point the light where you want it.

Already have low-voltage spotlights? Swap the bulbs for the Zigbee MR16.

Want colours? See the RGB downlight.

Add a presence sensor: the ZPS-Z1 can turn the lights on when you walk in.

Make your light switch smart: see the ZB-EU-02 Zigbee switch module, which fits behind your existing switch.

Works with Tuya, Apple Home, Alexa, Google and SmartThings

The downlight uses Zigbee 3.0, so it connects through a hub (not included):

• Tuya Zigbee hub: the Tuya or Smart Life app, plus Alexa and Google Home.
• Zemismart M1 or M6 hub: adds Apple Home and SmartThings.

In the Alexa app you can switch it on and off and change the brightness. Colour temperature is changed in the other apps.

Voice control

Say "Hey Siri, set the kitchen lights to 50%" or "Alexa, turn on the hallway lights".

Tunable white and dimmable

Set any white from a cosy 2700K to a crisp 6000K, and dim it right down for the evening. Save your favourite settings as scenes and switch between them with a tap.

True-to-life colour: Ra ≥ 95

With a colour rendering index of 95 or more, food, artwork, skin tones and furnishings look natural. That makes it a good choice for kitchens, dining rooms and over artwork.

Deep-set, anti-glare design

The LED sits deep inside a black reflector cup, so you see the light on the room rather than a bright dot in the ceiling. Zemismart rates the glare at UGR < 10.

Flicker-free light

A constant-current driver gives steady, flicker-free light that's comfortable on the eyes and doesn't strobe on phone cameras.

Tilts 30° to aim the light

Angle the head up to 30° to light a picture, a kitchen worktop or a feature wall.

Choose your beam angle

• 24°: a tighter beam for accent lighting, artwork and wall washing.
• 36°: a wider beam for general room lighting.

Slim 9mm trim and separate driver

The white trim is just 9mm wide for a clean, minimal look, and spring clips hold the light in the ceiling. The Zigbee LED driver sits separately above the ceiling.

Specifications

What's in the box

• 1 × Zemismart ZMZ-SL Zigbee downlight
• 1 × Zemismart Zigbee 12W LED driver

Installation

Cut a 75mm hole, connect the driver to the lighting circuit, plug the downlight into the driver and push it up into the ceiling. The spring clips hold it in place. To pair it, switch the light off and on 3–5 times at the wall switch.

This is a mains-wired light fitting. In the UK it must be installed by a qualified electrician.

User manual

Download the ZMZ-SL Zigbee downlight user manual (PDF)

Frequently asked questions

What size hole does it need?

A 75mm cut-out. The trim is 81.5mm across.

Do I need a hub?

Yes. A Tuya Zigbee hub, or a Zemismart M1 or M6 hub for Apple Home and SmartThings. The hub isn't included.

Can I change the colour temperature with Alexa?

The Alexa app supports on/off and brightness only. Change the colour temperature in the Tuya app, Apple Home, Google Home or SmartThings.

Which beam angle should I choose?

Choose 24° to highlight artwork, worktops or walls, and 36° for general lighting in a room.

Can I use it in a bathroom or outdoors?

It's rated IP20, so it's for dry indoor areas only. It's not suitable for bathroom zones or outdoors.

Can I use it with a dimmer switch?

No. Leave the wall switch on and dim it from the app or by voice.

Does it need an electrician?

Yes. It's a mains-wired ceiling light, so it should be installed by a qualified electrician.