Zemismart F8 kontrolpanel til smarte hjem – 8-tommer touchskærm til væg med indbygget Tuya Zigbee-hub, drejeknap og højttaler

Please note: the F8 is mains-powered (110–240V) and must be wired in by a qualified electrician. It mounts across two single wall boxes side by side (not included). See “Will it fit my wall?” below before ordering. It controls Tuya devices, has no Matter support, and doesn’t support voice conversation.

One screen for the whole house

The Zemismart F8 is an 8-inch wall-mounted touch screen that brings your Tuya smart home together in one place. Switch lights, dim and change colour, open the curtains, adjust the air con and run scenes, all from the wall, without reaching for your phone. A round 1.28-inch display with a rotary knob sits beside the main screen for quick adjustments.

Built-in Tuya Zigbee hub

The F8 has a Tuya Zigbee gateway built in, so you can add Tuya Zigbee devices directly to it in the Tuya Smart or Smart Life app. Switches, sensors, curtain motors, bulbs and more all work without a separate hub. It also controls WiFi Tuya devices on the same account.

Scenes at a tap

Set up to 10 scenes on the panel, such as “Home”, “Film night” or “Good night”, then run them with one tap. For example, open the front door and the hallway lights fade up, the curtains open and the heating comes on.

Colour and brightness control

For bound smart lights, use the screen’s colour wheel and sliders to set brightness, colour temperature (2700–6000K) and RGB colour. Zemismart states that bound lighting control also works offline. Turn the knob to fine-tune lights, air con temperature, curtain position or volume.

Built-in speaker

A speaker in the panel plays music and audio, and there are outputs for extra in-ceiling speakers (amplified, 2 × 10–25W).

Two built-in relays for lights

The F8 has two relay outputs (up to 200W each), so it can directly switch two lighting circuits as well as controlling your smart devices.

Installation

The F8 mounts on two single wall boxes side by side. Fix the metal base plate to the boxes, connect the wiring, then press the panel onto the base. Mains wiring must be done by a qualified electrician.

Specifications

What’s in the box

• 1 × F8 control panel
• 1 × mounting base plate
• User manual

Wall boxes and smart devices are sold separately.

Works well with

• Zigbee curtain switch (ZN-LC1E) and curtain motors
• Zigbee switch module (ZB-EU-02)
• Zigbee RGB downlight and LED strip controllers
• Presence sensor (ZPS-Z1) for automatic scenes
• Prefer a hub without a screen? See the M1 Pro

User manual

Download the F8 smart home control panel user manual (PDF)

Frequently asked questions

Will it fit my wall?

The F8 needs two single (86 × 86mm) back boxes fitted side by side, with about a 7mm gap between them (box centres about 86mm apart). A standard UK double (twin) box won’t line up with its fixings. Your electrician will need to fit two single boxes at the right spacing.

Do I need a separate Zigbee hub?

No. The F8 has a Tuya Zigbee gateway built in. Add Tuya Zigbee devices straight to it in the app.

Does it work with Apple Home or Matter?

No. It’s a Tuya panel. For Apple Home, use a Zemismart Matter hub such as the M1 Pro.

Can I talk to it like Alexa?

No. Voice conversation isn’t supported. Control it by touch and the knob, or through the Tuya app.

Does it need a neutral wire?

Yes. It’s powered from mains live and neutral.

What can it control?

Tuya smart devices on your account, including lights, switches, curtains, sensors, locks, cameras and air conditioners. The screen shows supported device categories.