Zemismart MT82-P מסילת וילון חשמלית מתכווננת – Matter על גבי Thread, פתיחה מהמרכז, 1.8–4.5 מ׳
1.8–3 מ'
£201.86 GBP
דילוג לפרטי המוצר
Zemismart MT82-P מסילת וילון חשמלית מתכווננת – Matter על גבי Thread, פתיחה מהמרכז, 1.8–4.5 מ׳
£201.86 GBP
MT82-P-3M 1.3
An electric curtain track that extends to fit your window
The Zemismart MT82-P is a ready-assembled electric curtain track that slides out to the length you need. Loosen one screw, extend the track, lock it again and it's ready to fit. There's no cutting and no joining of sections.
Choose from three size ranges: 1.8m–3m, 2.3m–4m or 2.5m–4.5m. Once fitted, open and close your curtains from your phone, by voice, with the included remote, or with a gentle pull by hand.
Centre opening only: the MT82-P is designed for a pair of curtains that part in the middle. If you need a single curtain that opens to one side, choose a splicing track kit instead.
Matter over Thread: works with every major smart home
The built-in Thread module means the MT82-P works with:
- Apple Home (including Siri)
- Amazon Alexa
- Google Home
- SmartThings (including Bixby)
- Home Assistant
For setup you need a Matter controller with a Thread border router. You may already own one:
- Apple: Apple TV 4K (2nd gen, or 3rd gen 128GB), HomePod (2nd gen), HomePod mini
- Google: Nest Hub (2nd gen), Nest Hub Max, Nest Wifi, Nest Wifi Pro
- Amazon: Echo (4th gen), Echo Hub, Echo Show 8 (3rd gen), Echo Show 10 (3rd gen), Echo Studio, eero 6, eero 6+, eero Pro 6, eero Pro 6E, eero Max 7
- SmartThings: SmartThings Hub v3 (Aeotec), SmartThings Hub v4, SmartThings Station
Voice control, schedules and automations
Say "Hey Siri, open the curtains", "Alexa, close the curtains", or the same with Google or Bixby (a compatible smart speaker is needed). Set the curtains to open in the morning and close at sunset, or link them to your lights and heating in a routine.
In Home Assistant you can see whether the curtains are open or closed in real time and use them in your own automations.
Remote control and pull start
The included remote has open, stop and close buttons. Use it in your hand or stick it to the wall with its magnetic mount. It runs on a standard CR2032 coin battery.
Give the curtain a gentle pull and the motor takes over to finish opening or closing it, which is handy when your phone isn't nearby.
Strong and quiet
- Handles heavy curtains: 1.2Nm torque and a recommended load of up to 50kg, enough for blackout and thermal curtains.
- Three speeds: Quiet, Normal and Quick.
- Dry contact port: for connecting wired controls.
Mains powered, so no charging
The motor plugs into a standard socket (100–240V) with its 1.5m power cable, so it never needs recharging. Plan for a socket within reach of the top corner of the window where the motor sits.
Installation
- Loosen the screw on the track joint.
- Slide the track out to the length you need.
- Tighten the screw to lock it.
- Move the carriers to each end and lock them in place.
- Fit the brackets no more than 50cm apart and clip the track on.
Measuring and choosing your size
- Covering a whole wall (alcove): track length = wall width minus 3cm.
- Covering just the window: track length = window width plus 70cm, so the curtains stack clear of the glass.
Then pick the size range your track length falls into:
| Size option | Fits a track length of |
|---|---|
| 1.8m–3m | 1.8m to 3m |
| 2.3m–4m | 2.3m to 4m |
| 2.5m–4.5m | 2.5m to 4.5m |
Space needed in a curtain box (pelmet)
- Single track: at least 10cm.
- Double track (e.g. voile plus blackout): at least 16cm. Order two kits.
Sizing made-to-measure curtains
- Height: finished curtain drop = measured height minus 5.5cm (the height of the track and runners).
- Width: make each curtain 10cm wider than half the track, so the pair overlaps in the middle.
- Pleated curtains give the neatest look.
What's in the box
- MT82 curtain motor with external antenna
- Extendable curtain track with carriers and runners fitted
- Power cable (1.5m)
- Remote control
- Large and small mounting brackets
- Wall plugs and screws
Specifications
| Spec | Value |
|---|---|
| Model | MT82-P |
| Protocol | Matter over Thread |
| Power | 100–240V AC, 50–60Hz (mains, 1.5m cable) |
| Torque | 1.2Nm |
| Recommended load | Up to 50kg |
| Speeds | Quiet, Normal, Quick |
| Opening | Centre opening only |
| Track sizes | 1.8m–3m, 2.3m–4m, 2.5m–4.5m (extendable) |
| Track height with runners | 5.5cm |
| Motor size | 275 × 59 × 49mm |
| Remote | 65.5 × 32.5 × 13.8mm, CR2032 battery, magnetic mount |
Quick setup
- Press the setting button on the motor three times quickly. The green light flashes.
- Open Apple Home, Alexa, Google Home, SmartThings or Home Assistant and choose to add a Matter device.
- Scan the Matter QR code on the motor and follow the prompts.
To pair the remote, press the setting button on the motor once (the motor vibrates), then press Stop on the remote. The motor vibrates again when it's paired.
Frequently asked questions
Does it need a plug socket?
Yes. The motor is mains powered and comes with a 1.5m cable, so you'll need a socket near the top corner of the window. If there isn't one, an electrician can fit a socket or fused spur.
Do I need a hub?
You need a Matter controller with a Thread border router, such as a HomePod mini, Apple TV 4K, Nest Hub (2nd gen), Echo (4th gen) or SmartThings Station. See the full list above.
Can I use it for a single curtain that opens to one side?
No. The MT82-P is centre opening only, for a pair of curtains.
Which size do I need?
Measure your track length (wall width minus 3cm, or window width plus 70cm) and choose the size range it falls into. For example, a 2.8m track fits the 1.8m–3m option.
Do I need to cut the track?
No. The track slides out to the length you need and locks with a screw.
Can I still open the curtains by hand?
Yes. Pull the curtain gently and the motor takes over.