{"title":"Energiövervakning","description":"\u003cp\u003eEnheter för energiövervakning från Zemismart visar hur mycket el dina apparater och kretsar använder, så att du ser vart energin tar vägen. Se mätvärdena i appen och använd dem i automationer där det stöds. Kontrollera mätdetaljer och installationskrav på respektive produktsida.\u003c\/p\u003e","products":[{"product_id":"zigbee-glass-touch-light-switch-us","title":"Zemismart pekbrytare i glas med Zigbee – 1–4 knappar, amerikansk 4×2-storlek, energiövervakning som tillval (kräver nolla)","description":"\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this switch is made for US and Latin American 4×2 back boxes. It does not fit standard UK 86mm back boxes. It needs a neutral wire and a Tuya Zigbee hub.\u003c\/p\u003e\n\u003ch2\u003eA glass touch switch for your Zigbee smart home\u003c\/h2\u003e\n\u003cp\u003eThe Zemismart Zigbee touch light switch has a clean tempered glass panel in white or black, with 1, 2, 3 or 4 touch keys. A light touch switches the light. You can also control it from the Tuya Smart or Smart Life app, by voice, or on a schedule. Choose the energy monitoring version (white) to see the power and energy your lights use.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/01-zigbee-smart-touch-switch-us-glass-panel.jpg?v=1792085634\" alt=\"Zigbee smart touch switch, US glass panel\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eWant each key labelled on a screen? See the \u003ca href=\"\/sv\/products\/zigbee-smart-switch-name-display-us-zms-206us\"\u003eZMS-206US\u003c\/a\u003e. Prefer physical push buttons? See the \u003ca href=\"\/sv\/products\/zm-808-zigbee-push-button-light-switch-us\"\u003eZM-808\u003c\/a\u003e. Prefer keys you can press? See the \u003ca href=\"\/sv\/products\/tb26-zigbee-paddle-light-switch-us\"\u003eTB26 paddle switch\u003c\/a\u003e. No Zigbee hub? See the \u003ca href=\"\/sv\/products\/matter-wifi-smart-switch-name-display-us-zm206\"\u003eMatter touch switch with display\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight touch control\u003c\/strong\u003e on a tempered glass panel. No hard press needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZigbee\u003c\/strong\u003e, so it pairs to your hub and stays off your WiFi.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacklight and indicator settings.\u003c\/strong\u003e Set the backlight brightness and the ON and OFF colours (red, blue, green, white or yellow) in the app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite or black glass.\u003c\/strong\u003e On the black version, the ring light glows blue when the light is on and white when it’s off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChild lock.\u003c\/strong\u003e Turn off the touch keys from the app so children can’t switch the lights.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimers, countdowns and power-on state\u003c\/strong\u003e in the Tuya app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlexa and Google Assistant\u003c\/strong\u003e, plus Apple Home, SmartThings and Home Assistant via a Zemismart M6 hub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional energy monitoring.\u003c\/strong\u003e See power, voltage, current and monthly energy use in the app.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/02-zigbee-touch-switch-light-touch-control.jpg?v=1792085634\" alt=\"Light touch control\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eYou will need a Zigbee hub\u003c\/h2\u003e\n\u003cp\u003eAdd the switch to a Tuya Zigbee hub in the Tuya Smart or Smart Life app. With the Zemismart M6 Matter hub, the switch can also be shared to Apple Home, Google Home, SmartThings and Home Assistant. The hub is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/03-zigbee-touch-switch-app-control-m6-hub.jpg?v=1792085634\" alt=\"App control in Apple Home, Google Home, Tuya, SmartThings and Home Assistant via the M6 hub\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eVoice control\u003c\/h2\u003e\n\u003cp\u003eLink the Tuya Smart or Smart Life app to Alexa or Google Home. With an M6 hub, you can also use Siri through Apple Home, or Bixby through SmartThings.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/04-zigbee-touch-switch-voice-control.jpg?v=1792085634\" alt=\"Voice control\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eTimers and settings\u003c\/h2\u003e\n\u003cp\u003eSet schedules that repeat daily or weekly, circulate and random timers, and countdowns. Choose what each gang does after a power cut (relay status), and check the switch log.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/05-zigbee-touch-switch-timing-countdown-relay-status.jpg?v=1792085634\" alt=\"Timing control, countdown and relay status\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/06-zigbee-touch-switch-backlight-indicator-settings.jpg?v=1792085634\" alt=\"Backlight and indicator settings\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/07-zigbee-touch-switch-child-lock.jpg?v=1792085634\" alt=\"Child lock\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWiring\u003c\/h2\u003e\n\u003cp\u003eConnect live to L, neutral to N, and each light to L1–L4.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/08-zigbee-touch-switch-wiring-diagram-zn2s-us04u.jpg?v=1792085634\" alt=\"Wiring diagram, ZN2S-US04U\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eStandard (white or black): ZN2S-US01U–04U. Energy monitoring (white): ZN-US01U–04U-PS (1–4 gang)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtocol\u003c\/td\u003e\n\u003ctd\u003eTuya Zigbee (IEEE 802.15.4, 2.4GHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eTouch keys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel\u003c\/td\u003e\n\u003ctd\u003eTempered glass, white or black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003eAC 100–240V, 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003eLive + neutral (neutral required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax load per gang\u003c\/td\u003e\n\u003ctd\u003e600W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby power\u003c\/td\u003e\n\u003ctd\u003e0.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlate size\u003c\/td\u003e\n\u003ctd\u003e120 × 72mm, 7mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth behind plate\u003c\/td\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBox type\u003c\/td\u003e\n\u003ctd\u003eUS \/ Latin American 4×2 (not UK 86mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApp\u003c\/td\u003e\n\u003ctd\u003eTuya Smart \/ Smart Life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice\u003c\/td\u003e\n\u003ctd\u003eAlexa, Google Assistant; Siri and Bixby via M6 hub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub\u003c\/td\u003e\n\u003ctd\u003eTuya Zigbee hub required (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/09-zigbee-touch-switch-product-parameters.jpg?v=1792085634\" alt=\"Product parameters\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cdiv style=\"max-width:100%;margin:1em 0;\"\u003e\u003cvideo controls playsinline preload=\"metadata\" poster=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/preview_images\/c38e998c1c1840d0b18242a569b2d60a.thumbnail.0000000000.jpg?v=1792086176\" style=\"width:100%;height:auto;\" aria-label=\"Zigbee touch switch in the Tuya app and the Apple Home app\"\u003e\u003csource src=\"https:\/\/cdn.shopify.com\/videos\/c\/vp\/c38e998c1c1840d0b18242a569b2d60a\/c38e998c1c1840d0b18242a569b2d60a.HD-720p-1.6Mbps-97749809.mp4\" type=\"video\/mp4\"\u003e\u003csource src=\"https:\/\/cdn.shopify.com\/videos\/c\/vp\/c38e998c1c1840d0b18242a569b2d60a\/c38e998c1c1840d0b18242a569b2d60a.SD-480p-0.9Mbps-97749809.mp4\" type=\"video\/mp4\"\u003e\u003c\/source\u003e\u003c\/video\u003e\u003c\/div\u003e\n\u003ch2\u003eEnergy monitoring version\u003c\/h2\u003e\n\u003cp\u003eThe PS version adds power statistics in the Tuya app: live power (W), voltage (V), current (A) and energy use by month and year (kWh). The wiring is the same. The energy monitoring version is available in white.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/10-zigbee-touch-switch-energy-monitoring-version.jpg?v=1792085634\" alt=\"Energy monitoring smart switch\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/11-zigbee-touch-switch-energy-monitoring-app.jpg?v=1792085634\" alt=\"View records and energy monitoring in the app\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/12-zigbee-touch-switch-energy-monitoring-wiring-zn-us04u-ps.jpg?v=1792085634\" alt=\"Energy monitoring version wiring diagram, ZN-US04U-PS\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat’s in the box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Zigbee touch switch (1, 2, 3 or 4 gang)\u003c\/li\u003e\n\u003cli\u003e2 × fixing screws\u003c\/li\u003e\n\u003cli\u003e1 × user manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWill it fit a UK back box?\u003c\/h3\u003e\n\u003cp\u003eNo. It’s sized for US and Latin American 4×2 boxes. For UK 86mm boxes, see the \u003ca href=\"\/sv\/products\/zn-rs01e-zigbee-glass-touch-light-switch-uk\"\u003eZN-RS01E Zigbee glass touch switch\u003c\/a\u003e, or the \u003ca href=\"\/sv\/products\/zemismart-zm202-matter-smart-light-switch\"\u003eZM202 Matter touch switch\u003c\/a\u003e if you’d rather not use a hub.\u003c\/p\u003e\n\u003ch3\u003eDoes it need a neutral wire?\u003c\/h3\u003e\n\u003cp\u003eYes, it needs live and neutral.\u003c\/p\u003e\n\u003ch3\u003eDo I need a hub?\u003c\/h3\u003e\n\u003cp\u003eYes, a Tuya Zigbee hub. For Apple Home, SmartThings or Home Assistant, use the Zemismart M6 hub.\u003c\/p\u003e\n\u003ch3\u003eWhat’s the difference between the two versions?\u003c\/h3\u003e\n\u003cp\u003eThey look the same. The energy monitoring version comes in white, and also shows power, voltage, current and energy use in the app.\u003c\/p\u003e\n\u003ch3\u003eCan I lock the switch?\u003c\/h3\u003e\n\u003cp\u003eYes. Turn on child lock in the app and the touch keys stop working until you turn it off. App and voice control still work.\u003c\/p\u003e\n\u003ch3\u003eWant physical buttons or name labels?\u003c\/h3\u003e\n\u003cp\u003eSee the \u003ca href=\"\/sv\/products\/zm-808-zigbee-push-button-light-switch-us\"\u003eZM-808 push button switch\u003c\/a\u003e, or the \u003ca href=\"\/sv\/products\/zigbee-smart-switch-name-display-us-zms-206us\"\u003eZMS-206US\u003c\/a\u003e with a name display.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it myself?\u003c\/h3\u003e\n\u003cp\u003eWe recommend a qualified electrician, following your local wiring regulations.\u003c\/p\u003e","brand":"Zemismart","offers":[{"title":"Standard \/ Vit \/ 1 knapp","offer_id":67710785880373,"sku":"ZN2S-US01U 17.33","price":37.37,"currency_code":"GBP","in_stock":true},{"title":"Standard \/ Vit \/ 2 knappar","offer_id":67710786797877,"sku":"ZN2S-US02U 17.33","price":40.31,"currency_code":"GBP","in_stock":true},{"title":"Standard \/ Vit \/ 3 knappar","offer_id":67710786830645,"sku":"ZN2S-US03U 17.33","price":43.11,"currency_code":"GBP","in_stock":true},{"title":"Standard \/ Vit \/ 4 knappar","offer_id":67710786863413,"sku":"ZN2S-US04U 17.33","price":45.91,"currency_code":"GBP","in_stock":true},{"title":"Med energiövervakning \/ Vit \/ 1 knapp","offer_id":67710786896181,"sku":"ZN-US01U-PS 17.33","price":0.0,"currency_code":"GBP","in_stock":true},{"title":"Med energiövervakning \/ Vit \/ 2 knappar","offer_id":67710786928949,"sku":"ZN-US02U-PS 17.33","price":0.0,"currency_code":"GBP","in_stock":true},{"title":"Med energiövervakning \/ Vit \/ 3 knappar","offer_id":67710786961717,"sku":"ZN-US03U-PS 17.33","price":0.0,"currency_code":"GBP","in_stock":true},{"title":"Med energiövervakning \/ Vit \/ 4 knappar","offer_id":67710786994485,"sku":"ZN-US04U-PS 17.33","price":0.0,"currency_code":"GBP","in_stock":true},{"title":"Standard \/ Svart \/ 1 knapp","offer_id":67710817730869,"sku":"ZN2S-US01U-BK 17.36","price":37.65,"currency_code":"GBP","in_stock":true},{"title":"Standard \/ Svart \/ 2 knappar","offer_id":67710817763637,"sku":"ZN2S-US02U-BK 17.36","price":40.31,"currency_code":"GBP","in_stock":true},{"title":"Standard \/ Svart \/ 3 knappar","offer_id":67710817796405,"sku":"ZN2S-US03U-BK 17.36","price":42.97,"currency_code":"GBP","in_stock":true},{"title":"Standard \/ Svart \/ 4 knappar","offer_id":67710817829173,"sku":"ZN2S-US04U-BK 17.36","price":45.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/01-zemismart-zigbee-glass-touch-light-switch-us-4-gang.jpg?v=1792085634"},{"product_id":"zw-eu-02-ps-zigbee-switch-module-energy-monitoring","title":"Zemismart Zigbee-brytarmodul för 2 kanaler med energiövervakning – monteras bakom ljusströmbrytaren, se effekt och kWh i appen (ZW-EU-02-PS, kräver nolla)","description":"\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this module needs a neutral wire and a Tuya Zigbee hub. It must be installed by a qualified electrician.\u003c\/p\u003e\n\u003ch2\u003eMake your switches smart – and see what your lights use\u003c\/h2\u003e\n\u003cp\u003eThe Zemismart ZW-EU-02-PS is a compact 2 gang Zigbee switch module that fits behind your existing wall switches. Keep the switches you have, and add app control, voice control and schedules. It also measures power, so you can see the current, wattage, voltage and energy use (kWh) in the Tuya Smart or Smart Life app.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/01-zw-eu-02-ps-features-app-energy-voice-timer.jpg?v=1792086785\" alt=\"ZW-EU-02-PS features: app, energy monitoring, voice and timer\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy choose the ZW-EU-02-PS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep your existing switches.\u003c\/strong\u003e Wire your one-way or two-way wall switches to the module’s switch inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy monitoring.\u003c\/strong\u003e See current (mA), power (W), voltage (V) and today’s and total energy (kWh).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 gangs in one small module\u003c\/strong\u003e (51 × 53 × 21mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZigbee\u003c\/strong\u003e, so it pairs to your hub and stays off your WiFi.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimers, countdowns and power-on state\u003c\/strong\u003e in the app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlexa and Google Assistant\u003c\/strong\u003e voice control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApp control\u003c\/h2\u003e\n\u003cp\u003eAdd the module to a Tuya Zigbee hub, such as the Zemismart T1 or M6, in the Tuya Smart or Smart Life app. Each gang appears as its own switch you can rename.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/02-zw-eu-02-ps-tuya-app-control-t1-m6-hub.jpg?v=1792086786\" alt=\"Tuya app control via a T1 or M6 hub\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eEnergy monitoring\u003c\/h2\u003e\n\u003cp\u003eOpen Electric Stats in the app to see live current, power and voltage, today’s usage and the running total in kWh, plus a monthly chart.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/03-zw-eu-02-ps-electric-stats-energy-monitoring.jpg?v=1792086785\" alt=\"Electric stats in the Tuya app\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eTimers, voice and relay status\u003c\/h2\u003e\n\u003cp\u003eSet schedules, countdowns and random timers. Use Alexa or Google Assistant to switch each gang. Choose what each gang does after a power cut: off, on, or its last state.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/04-zw-eu-02-ps-timer-control.jpg?v=1792086786\" alt=\"Timer control\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/05-zw-eu-02-ps-voice-control-alexa-google.jpg?v=1792086786\" alt=\"Voice control with Alexa and Google\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/06-zw-eu-02-ps-relay-status.jpg?v=1792086786\" alt=\"Relay status\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWiring\u003c\/h2\u003e\n\u003cp\u003eConnect live to L, neutral to N, and each light to L1 and L2. Wire your wall switches to COM, K1 and K2. Both one-way and two-way switch wiring are supported.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/07-zw-eu-02-ps-wiring-one-way-and-two-way-switch.jpg?v=1792086785\" alt=\"Wiring diagram for one-way and two-way switches\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePairing\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMake sure your phone and Zigbee hub are on the same 2.4GHz WiFi network.\u003c\/li\u003e\n\u003cli\u003ePower on the module and press and hold its button until the blue light flickers.\u003c\/li\u003e\n\u003cli\u003eIn the Tuya app, open your Zigbee hub, tap Add Sub-Device and follow the prompts.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/08-zw-eu-02-ps-how-to-pair-zigbee-hub.jpg?v=1792086786\" alt=\"How to connect to the app\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eZW-EU-02-PS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGangs\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtocol\u003c\/td\u003e\n\u003ctd\u003eTuya Zigbee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003eAC 110–240V, 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003eLive + neutral (neutral required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax load\u003c\/td\u003e\n\u003ctd\u003e300W per gang, 600W total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch inputs\u003c\/td\u003e\n\u003ctd\u003eCOM, K1, K2 (one-way or two-way switches)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy monitoring\u003c\/td\u003e\n\u003ctd\u003eCurrent, power, voltage, kWh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e51 × 53 × 21mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApp\u003c\/td\u003e\n\u003ctd\u003eTuya Smart \/ Smart Life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice\u003c\/td\u003e\n\u003ctd\u003eAmazon Alexa, Google Assistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub\u003c\/td\u003e\n\u003ctd\u003eTuya Zigbee hub required (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/09-zw-eu-02-ps-dimensions-51x53x21mm.jpg?v=1792086785\" alt=\"Dimensions, 51 × 53 × 21mm\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cdiv style=\"max-width:100%;margin:1em 0;\"\u003e\u003cvideo controls playsinline preload=\"metadata\" poster=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/preview_images\/1921e2ee94fb47af854ddae43dfb419a.thumbnail.0000000000.jpg?v=1792086802\" style=\"width:100%;height:auto;\" aria-label=\"Relay status, electric stats and the ZW-EU-02-PS module\"\u003e\u003csource src=\"https:\/\/cdn.shopify.com\/videos\/c\/vp\/1921e2ee94fb47af854ddae43dfb419a\/1921e2ee94fb47af854ddae43dfb419a.HD-720p-1.6Mbps-97750444.mp4\" type=\"video\/mp4\"\u003e\u003csource src=\"https:\/\/cdn.shopify.com\/videos\/c\/vp\/1921e2ee94fb47af854ddae43dfb419a\/1921e2ee94fb47af854ddae43dfb419a.SD-480p-0.9Mbps-97750444.mp4\" type=\"video\/mp4\"\u003e\u003c\/source\u003e\u003c\/video\u003e\u003c\/div\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWill it fit behind a UK light switch?\u003c\/h3\u003e\n\u003cp\u003eIt’s 21mm deep, so it fits behind most switches in a 35mm or deeper back box. Shallow 25mm boxes may be too tight.\u003c\/p\u003e\n\u003ch3\u003eDoes it need a neutral wire?\u003c\/h3\u003e\n\u003cp\u003eYes. If you don’t have a neutral at the switch, see the \u003ca href=\"\/sv\/products\/zigbee-smart-switch-module-2-gang-no-neutral\"\u003eZB-EU-02 module\u003c\/a\u003e, which has a no-neutral option (without energy monitoring).\u003c\/p\u003e\n\u003ch3\u003eDoes energy monitoring cover both gangs?\u003c\/h3\u003e\n\u003cp\u003eThe app’s Electric Stats page shows the module’s readings. The figures are for monitoring your usage, not for billing.\u003c\/p\u003e\n\u003ch3\u003eHow much can each gang switch?\u003c\/h3\u003e\n\u003cp\u003eUp to 300W per gang, 600W in total. It’s designed for lighting, not heaters or high-power appliances.\u003c\/p\u003e\n\u003ch3\u003eDo I need a hub?\u003c\/h3\u003e\n\u003cp\u003eYes, a Tuya Zigbee hub such as the Zemismart T1 or M6.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it myself?\u003c\/h3\u003e\n\u003cp\u003eIn the UK, work on lighting circuits must meet Part P of the Building Regulations. We recommend a qualified electrician.\u003c\/p\u003e","brand":"Zemismart","offers":[{"title":"Default Title","offer_id":67710850302261,"sku":"ZW-EU-02-PS 17.40","price":28.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/01-zemismart-zw-eu-02-ps-zigbee-2-gang-switch-module-energy-monitoring.jpg?v=1792086785"},{"product_id":"zigbee-energy-meter-single-phase-spm01","title":"Zemismart Zigbee-energimätare – enfas 63A smart energimätare för Tuya, Home Assistant (Zigbee2MQTT) och Homey (SPM01-D2TZ)","description":"\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this sensor fits inside your consumer unit (fuse box) and must be installed by a qualified electrician. It needs a Tuya Zigbee hub, a Zigbee2MQTT coordinator or a Homey Pro hub (none included). It works with Home Assistant through Zigbee2MQTT only. ZHA isn’t supported.\u003c\/p\u003e\n\u003cp\u003eThree-phase supply? See the \u003ca href=\"\/sv\/products\/3-phase-zigbee-energy-meter-spm02\"\u003eSPM02 3-phase Zigbee energy meter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/01-zigbee-energy-monitor-single-phase-63a.jpg?v=1792185593\" alt=\"Zigbee energy monitor, single phase, 63A\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSee exactly where your electricity goes\u003c\/h2\u003e\n\u003cp\u003eThe Zemismart SPM01 is a small Zigbee energy sensor that measures the electricity flowing through a circuit, up to 63A. Pass the live conductor through the sensor and connect its two short leads to live and neutral. You’ll then see voltage, current, power and energy use live in your app, with hourly, daily, monthly and yearly history. Zemismart states measurement accuracy within 1%.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/02-zemismart-spm01-zigbee-energy-meter.jpg?v=1792185593\" alt=\"Zemismart SPM01 Zigbee energy meter\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/04-tuya-app-energy-monitoring-voltage-current-power.jpg?v=1792185593\" alt=\"Tuya app energy monitoring: voltage, current and power\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eTiny, and it doesn’t take a DIN rail slot\u003c\/h2\u003e\n\u003cp\u003eAt just 48 × 18 × 21mm, the SPM01 sits on the cable inside the consumer unit rather than taking up a space on the DIN rail. That makes it easy to add to a board that’s already full.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/03-zigbee-energy-meter-dimensions-48mm.jpg?v=1792185593\" alt=\"Zigbee energy meter dimensions, 48mm\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/05-single-phase-energy-monitor-installation-consumer-unit.jpg?v=1792185600\" alt=\"Single-phase energy monitor installation in a consumer unit\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eMonitor a whole circuit or the whole house\u003c\/h2\u003e\n\u003cp\u003eFit it on one circuit, such as the kitchen, an EV charger supply or a hot tub, to see what that circuit uses. Or fit it where the supply enters the board to watch the whole house, as long as the cable fits the 9.8mm hole. The arrow on the sensor shows the direction of energy flow. Energy flowing the other way, for example from solar panels, is recorded separately as reverse energy.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/06-energy-meter-installation-scheme-energy-flow-direction.jpg?v=1792185600\" alt=\"Energy meter installation scheme and energy flow direction\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDetailed data in the Tuya app\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLive readings:\u003c\/strong\u003e voltage, current, active power, power factor and frequency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy:\u003c\/strong\u003e total forward (imported) and reverse (exported) kWh, plus energy used this hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHistory:\u003c\/strong\u003e day, month and year charts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReporting interval:\u003c\/strong\u003e 600 seconds by default, adjustable in the app\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/07-energy-meter-electricity-consumption-statistics.jpg?v=1792185600\" alt=\"Energy meter electricity consumption statistics\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/08-energy-meter-voltage-current-power-data.jpg?v=1792185600\" alt=\"Energy meter voltage, current and power data\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/10-energy-meter-data-report-duration-setting.jpg?v=1792185600\" alt=\"Energy meter data report duration setting\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eAlerts when something’s wrong\u003c\/h2\u003e\n\u003cp\u003eSet alarms for high power, over-current, over-voltage, under-voltage, high temperature and negative active power. You’ll get a phone notification when a threshold is crossed.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/09-energy-monitor-high-power-alarm.jpg?v=1792185600\" alt=\"Energy monitor high power alarm\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eHome Assistant and Homey\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHome Assistant:\u003c\/strong\u003e pair it with a Zigbee2MQTT coordinator (a USB Zigbee dongle). Voltage, current, power, energy, produced energy, power factor and frequency appear as entities, ready for the Home Assistant Energy dashboard. ZHA isn’t supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHomey Pro:\u003c\/strong\u003e view imported and exported energy, voltage, current, power, apparent power and power factor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/11-zigbee-energy-meter-tuya-hub-or-zigbee2mqtt.jpg?v=1792185600\" alt=\"Zigbee energy meter with a Tuya hub or Zigbee2MQTT\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/12-zigbee-energy-meter-home-assistant-zigbee2mqtt.jpg?v=1792185600\" alt=\"Zigbee energy meter in Home Assistant via Zigbee2MQTT\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/13-zigbee-energy-meter-homey-app.jpg?v=1792185600\" alt=\"Zigbee energy meter in the Homey app\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSPM01-D2TZ (Zigbee version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eSingle phase (1P+N)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated voltage\u003c\/td\u003e\n\u003ctd\u003e110–240V AC, 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e10A basic, 63A max, 50mA starting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003eWithin 1% (manufacturer’s figure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThrough-hole\u003c\/td\u003e\n\u003ctd\u003e9.8mm diameter (live conductor only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasures\u003c\/td\u003e\n\u003ctd\u003eV, A, W, power factor, Hz, forward and reverse kWh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDefault report interval\u003c\/td\u003e\n\u003ctd\u003e600 seconds (adjustable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOver-voltage category\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated insulation voltage\u003c\/td\u003e\n\u003ctd\u003e250V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpulse withstand voltage\u003c\/td\u003e\n\u003ctd\u003e4kV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eIP20 (indoor, inside an enclosure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−25°C to 60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e48 × 18 × 21mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorks with\u003c\/td\u003e\n\u003ctd\u003eTuya Zigbee hub, Zigbee2MQTT (Home Assistant), Homey Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/14-energy-meter-features-current-voltage-power.jpg?v=1792185600\" alt=\"Energy meter features: current, voltage and power\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/15-zigbee-energy-meter-specifications.jpg?v=1792185600\" alt=\"Zigbee energy meter specifications\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat’s in the box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × SPM01 Zigbee energy sensor\u003c\/li\u003e\n\u003cli\u003eQuick installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe hub or coordinator isn’t included.\u003c\/p\u003e\n\u003ch2\u003eWorks well with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eZemismart \u003ca href=\"\/sv\/products\/m1-pro-matter-zigbee-hub\"\u003eM1 Pro hub\u003c\/a\u003e, \u003ca href=\"\/sv\/products\/m6-matter-zigbee-gateway-ethernet\"\u003eM6\u003c\/a\u003e or \u003ca href=\"\/sv\/products\/m1-matter-zigbee-thread-hub\"\u003eM1\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/sv\/products\/smart-immersion-heater-switch-zigbee-30a\"\u003eSmart immersion heater switch\u003c\/a\u003e: see what your immersion costs, then put it on a timer\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/sv\/products\/zigbee-smart-switch-module-2-gang-no-neutral\"\u003eZigbee switch module (ZB-EU-02)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eTrack water too: see the \u003ca href=\"\/sv\/products\/zigbee-smart-water-meter-ultrasonic\"\u003e213E smart water meter\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUser manual\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/zigbee-energy-monitor-single-phase-63a-user-manual.pdf?v=1792185612\" target=\"_blank\" rel=\"noopener\"\u003eDownload the SPM01 quick installation guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I fit it myself?\u003c\/h3\u003e\n\u003cp\u003eNo. It goes inside your consumer unit, which must be done by a qualified electrician with the power off.\u003c\/p\u003e\n\u003ch3\u003eWill it fit around my main meter tails?\u003c\/h3\u003e\n\u003cp\u003eThe hole is 9.8mm across, and only the live conductor passes through. Many UK main supply tails (16mm² or 25mm², double-insulated) are thicker than that. Your electrician can check, or fit it on an individual circuit cable instead.\u003c\/p\u003e\n\u003ch3\u003eDoes it work with Home Assistant?\u003c\/h3\u003e\n\u003cp\u003eYes, through Zigbee2MQTT with a Zigbee USB coordinator. It doesn’t work with ZHA.\u003c\/p\u003e\n\u003ch3\u003eCan it measure my solar export?\u003c\/h3\u003e\n\u003cp\u003eIt records energy in both directions: forward (imported) and reverse (exported). It’s a monitor, not a billing meter, so use your supplier’s smart meter for export payments.\u003c\/p\u003e\n\u003ch3\u003eDoes it control or switch anything?\u003c\/h3\u003e\n\u003cp\u003eNo. It only measures. To switch an appliance off, pair it with a smart switch in an automation.\u003c\/p\u003e\n\u003ch3\u003eHow often does it update?\u003c\/h3\u003e\n\u003cp\u003eEvery 600 seconds (10 minutes) by default. You can change the reporting interval in the app’s alarm settings.\u003c\/p\u003e","brand":"Zemismart","offers":[{"title":"Default Title","offer_id":67733295595829,"sku":"SPM01-D2TZ 23.1","price":59.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/01-zigbee-energy-monitor-single-phase-63a.jpg?v=1792185593"},{"product_id":"3-phase-zigbee-energy-meter-spm02","title":"Zemismart trefas Zigbee-energimätare – 63A trefas energimätare för Home Assistant (Zigbee2MQTT) och Tuya (SPM02)","description":"\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this is a three-phase meter for three-phase supplies (most UK homes are single phase; see our single-phase \u003ca href=\"\/sv\/products\/zigbee-energy-meter-single-phase-spm01\"\u003eSPM01\u003c\/a\u003e). It’s fitted inside the distribution board by a qualified electrician. It needs a Tuya Zigbee hub or a Zigbee2MQTT coordinator (not included). It works with Home Assistant through Zigbee2MQTT. ZHA isn’t supported on this version.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/01-zemismart-spm02-3-phase-zigbee-energy-meter.jpg?v=1792185741\" alt=\"Zemismart SPM02 3-phase Zigbee energy meter\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eMonitor all three phases from one small sensor\u003c\/h2\u003e\n\u003cp\u003eThe Zemismart SPM02 measures a three-phase supply up to 63A per phase. Pass each phase conductor through its own hole (X, Y and Z), connect the four leads to the three phases and neutral, and you’ll see voltage, current and power for every phase. It also shows the totals for the whole supply.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/02-three-phase-zigbee-energy-monitor-63a.jpg?v=1792185741\" alt=\"Three-phase Zigbee energy monitor, 63A\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/04-3-phase-energy-meter-installation-distribution-board.jpg?v=1792185741\" alt=\"3-phase energy meter installation in a distribution board\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eNo DIN rail space needed\u003c\/h2\u003e\n\u003cp\u003eAt 53 × 46 × 21mm, it sits on the cables inside the board instead of taking up a DIN rail slot. That’s ideal for crowded commercial or domestic boards.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/03-3-phase-energy-meter-dimensions-no-din-rail.jpg?v=1792185740\" alt=\"3-phase energy meter dimensions, no DIN rail needed\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eBuilt for Home Assistant\u003c\/h2\u003e\n\u003cp\u003ePair it with a Zigbee2MQTT coordinator and every measurement appears in Home Assistant:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePer-phase and total voltage, current, active power, reactive power, apparent power and power factor\u003c\/li\u003e\n\u003cli\u003eImported and exported energy, ready for the Home Assistant Energy dashboard\u003c\/li\u003e\n\u003cli\u003eAdjustable reporting intervals in Zigbee2MQTT (30 seconds by default, down to 1 second)\u003c\/li\u003e\n\u003cli\u003eAn energy reset option to zero the counters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/05-zigbee-3-0-energy-meter-home-assistant.jpg?v=1792185748\" alt=\"Zigbee 3.0 energy meter for Home Assistant\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/06-3-phase-energy-meter-zigbee2mqtt-reporting-interval.jpg?v=1792185748\" alt=\"3-phase energy meter Zigbee2MQTT reporting interval\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/08-home-assistant-energy-dashboard-solar-three-phase.jpg?v=1792185748\" alt=\"Home Assistant energy dashboard with solar, three phase\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSolar import and export\u003c\/h2\u003e\n\u003cp\u003eThe SPM02 measures energy in both directions, so with solar panels you can see how much you take from the grid and how much you send back. In Home Assistant through Zigbee2MQTT, these values feed the Energy dashboard’s grid and solar views. The Tuya app doesn’t show the two-way data.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/07-bi-directional-energy-measurement-solar-import-export.jpg?v=1792185747\" alt=\"Bi-directional energy measurement: solar import and export\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eTuya app monitoring\u003c\/h2\u003e\n\u003cp\u003eWith a Tuya Zigbee hub, you can view live readings and energy history in the Smart Life or Tuya Smart app, and set alerts for over- or under-voltage, high power, high temperature, high consumption and unbalanced load across the phases. The default reporting interval in the Tuya app is 600 seconds.\u003c\/p\u003e\n\u003ch2\u003eAccurate to within 1%\u003c\/h2\u003e\n\u003cp\u003eZemismart states active energy accuracy within 1%. This is a monitoring device, not a billing meter.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/09-precise-energy-measurement-lighting-appliances.jpg?v=1792185748\" alt=\"Energy measurement for lighting and appliances\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/12-three-phase-energy-meter-features.jpg?v=1792185747\" alt=\"Three-phase energy meter features\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003ePass the phase conductors through the holes in the direction of the printed arrow (energy flow), and connect the brown (X), black (Y), grey (Z) and blue (N) leads to the matching phases and neutral. The voltage leads must match the conductors in the holes. Don’t install it downstream of contactors, variable-speed drives or motor starters. Turn off all supplies before work.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/11-3-phase-energy-meter-installation-scheme.jpg?v=1792185748\" alt=\"3-phase energy meter installation scheme\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSPM02-D2TZ-U01-ZM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eThree phase, four wire (3P+N)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated voltage\u003c\/td\u003e\n\u003ctd\u003e110–240V AC phase to neutral; 208–415V AC phase to phase; 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003ctd\u003e10A basic, 63A max per phase, 50mA starting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003eWithin 1% (manufacturer’s figure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThrough-holes\u003c\/td\u003e\n\u003ctd\u003e3 × 9.8mm (X, Y, Z)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOver-voltage category\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated insulation voltage\u003c\/td\u003e\n\u003ctd\u003e440V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpulse withstand voltage\u003c\/td\u003e\n\u003ctd\u003e4kV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eIP20 (inside an enclosure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−25°C to 60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e53 × 46 × 21mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorks with\u003c\/td\u003e\n\u003ctd\u003eTuya Zigbee hub (Smart Life), Zigbee2MQTT (Home Assistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/13-3-phase-zigbee-energy-meter-specifications.jpg?v=1792185747\" alt=\"3-phase Zigbee energy meter specifications\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/10-zigbee-energy-meter-version-selection.jpg?v=1792185748\" alt=\"Zigbee energy meter version selection\" loading=\"lazy\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat’s in the box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × SPM02 three-phase Zigbee energy sensor\u003c\/li\u003e\n\u003cli\u003eQuick installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWorks well with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/sv\/products\/zigbee-energy-meter-single-phase-spm01\"\u003eSingle-phase SPM01 energy meter\u003c\/a\u003e for individual circuits\u003c\/li\u003e\n\u003cli\u003eZemismart \u003ca href=\"\/sv\/products\/m1-pro-matter-zigbee-hub\"\u003eM1 Pro hub\u003c\/a\u003e or \u003ca href=\"\/sv\/products\/m6-matter-zigbee-gateway-ethernet\"\u003eM6 gateway\u003c\/a\u003e for the Tuya app\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/sv\/products\/smart-immersion-heater-switch-zigbee-30a\"\u003eSmart immersion heater switch\u003c\/a\u003e, to divert surplus solar with a Home Assistant automation\u003c\/li\u003e\n\u003cli\u003eTrack water too: see the \u003ca href=\"\/sv\/products\/zigbee-smart-water-meter-ultrasonic\"\u003e213E smart water meter\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUser manual\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/zemismart-spm02-3-phase-zigbee-energy-meter-user-manual.pdf?v=1792185733\" target=\"_blank\" rel=\"noopener\"\u003eDownload the SPM02 user manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I have a three-phase supply?\u003c\/h3\u003e\n\u003cp\u003eMost UK homes are single phase. Three-phase supplies are more common on farms, in commercial premises and in larger or newer homes. Your electrician can confirm. For single phase, choose the SPM01.\u003c\/p\u003e\n\u003ch3\u003eDoes it work with Home Assistant?\u003c\/h3\u003e\n\u003cp\u003eYes, through Zigbee2MQTT with a Zigbee coordinator. This version doesn’t support ZHA.\u003c\/p\u003e\n\u003ch3\u003eCan I see solar export?\u003c\/h3\u003e\n\u003cp\u003eYes, in Home Assistant through Zigbee2MQTT. The Tuya app doesn’t display the two-way data.\u003c\/p\u003e\n\u003ch3\u003eWill it fit around my cables?\u003c\/h3\u003e\n\u003cp\u003eEach hole is 9.8mm across, for one phase conductor. Larger supply cables may not fit, so check with your electrician.\u003c\/p\u003e\n\u003ch3\u003eCan I install it myself?\u003c\/h3\u003e\n\u003cp\u003eNo. It must be fitted inside the distribution board by a qualified electrician.\u003c\/p\u003e","brand":"Zemismart","offers":[{"title":"Default Title","offer_id":67733298872629,"sku":"SPM02-D2TZ 23.2","price":65.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/9379\/9221\/files\/01-zemismart-spm02-3-phase-zigbee-energy-meter.jpg?v=1792185741"}],"url":"https:\/\/zemismart.store\/sv\/collections\/energy-monitoring.oembed","provider":"Zemismart","version":"1.0","type":"link"}